Gas Pressure Regulators
We are a leading Manufacturer of gas pressure regulators with inbuilt safety shut off 2 bar, gas pressure regulators, 2 bar gas pressure regulators, 5 bar gas pressure filter regulators and gas pressure regulators with inbuilt safety shut off 5 bar from Pune, India.
| Outlet Pressure Range | 9 to 800 mbar |
| Minimum Inlet Pressure | 0.5 Bar |
| Environment temperature rating | -20 to +60 Deg. C |
| Sizes | DN15 to DN100 |
| Minimum Inlet Pressure | 0.5 Bar |
| Outlet Pressure Range | 9 to 800 mbar |
| Sizes | DN15 to DN100 |
| Maximum Inlet Pressure | 5 Bar |
| Environment Temperature Rating | -20 to +60 degree C |
Gas Trains
Manufacturer of a wide range of products which include multi burner gas train, prepiped gas trains / metering & regulating skid, loop design prepiped gas trains, gas train with in built pilot line and gas trains.
| Maximum Inlet Pressure | 2 bar |
| Max. Gas Flow | 100Nm3/hr |
| Piping | MS SH40 Seamless |
| Clamping | Tube Clamps |
| Mounting | MS Structural Mounting Skid |
| Max inlet pressure | Upto 5 bar |
| Type | Gas Trains |
| Max. Gas Flow | 100Nm3/hr |
| Clamping | Tube Clamps |
Gas Safety Valve
Providing you the best range of manual reset type pressure relief valve, automatic normally closed gas solenoid valve, slam shut off valve, manually operated jerk handle isolation valves, manually reset type normally closed solenoid valves and automatic reset type normally open solenoid valves with effective & timely delivery.
| Environment Temperature | -15 to 60 Degree C |
| Maximum Working Pressure | 500mbar TO 6 BAR |
| Material | Die Cast Aluminum |
| Body | Die Cast Aluminum |
| E | -15 to +100 degree C |
| Working Pressure | 2 Bar or 6 Bar versions available |
| Suitable For | Natural Gas, LPG, Propane, Dry Gases and Non Aggressive gases |
| Size | DN15 to DN150 |
Zero Governor Regulator
Prominent & Leading Manufacturer from Pune, we offer zero governor regulators.
Gas Filter
We are a leading Manufacturer of gas filter from Pune, India.
| Outlet Pressure Range | 0.2 to 120 mbar |
| Maximum Inlet Pressure | 500 mbar |
| Sizes | DN15 to DN100 |
| Body | Die Cast Aluminum |
| Suitable For | Natural Gas, LPG, Propane and Dry Gases |
| Sizes | DN15 to DN300 |
| Body | Die Cast Aluminum |
| Environment Temperature Rating | -20 to +70 degree C |
| Filtration | 10, 20 or 50 microns. |
| Suitable For | Natural Gas, LPG, Propane and Dry Gases |
| Working Pressure | 2 Bar or 6 Bar versions available |
Harji Dual Fuel Burner 62
Designed to give maintenance free operation.
Dual Fuel Burner can be used for Heavy oil, Light oil, Gas (Coke Oven Gas, Natural Gas (PNG), LPG)
Suitable for tough conditions such as forge furnaces fired with heavy oil
Harji Fire All Oil Burner 54
Fire all oil Burners are rugged, maintenance free, sealed in burners for burning light or heavy oil on a wide variety of applications. Oil viscosity at the burners should not exceed 100 SSU. Minimum atomizing pressure at the burner is 14 osi for light oil, 22 osi for heavy oil.
| Burner Size | AIR PRESSURE AT 28” WG |
| 62-3 | 14 LPH |
| 62-4 | 17 LPH |
| 62-5 | 30 LPH |
| Burner Size | Air Pressure 1055mm (40” ) WG |
| 54-6 | 55 LPH |
| 54-7 | 88 LPH |
| 54-8A | 151 LPH |
| 54- 8B | 252 LPH |
Harji Gas Burner 42
Gas Burners are widely used on heat treatment, Tempering and non ferrous melting furnaces, kilns, ovens, air heaters, dryers, chemical process equipment and other applications where superior temperature uniformity is required. Fuel can be used:
Coke oven Gas
Natural Gas (PNG)
LPG
Harji Dual Fuel Burner 642
Series 642 Dual Fuel Burner offered in sizes 3, 4, 5, 6, 7A extended downward the range of sizes of distillate oil and gas nozzle mix sealed in burner that are stable with large amounts of excess air, on stoichiometeric ratio. Excess air can improve temperature temperature uniformity by avoiding hot spots in front of burners
Burners can be lighted at rich, lean or correct air/fuel ratio, then immediately turned to high fire. Required oil pressure at the burner is nearly zero, but a pressure drop of about 0.7kg/cm2 should be taken across the Sensitrol valve. If the furnace temperature after shutdown rises above 1000°C, pass air through the burner to prevent overheating of burner internals.
| Burner Size | Air Pressure 703mm (28” ) WG |
| 42-2 | 4.5 kg/hr |
| 42-3 | 7.5 kg/hr |
| 42-4 | 12 kg/hr |
| 42-5 | 19 kg/hr |
| 42-6 | 31 kg/hr |
| 42-7A | 54 kg/hr |
| Burner Size | Air Pressure 703 MM (28" ) WG |
| 642-3 | 11 LPH |
| 642-4 | 17 LPH |
| 642-5 | 24 LPH |
| 642-6 | 42 LPH |
| 642-7A | 75 LPH |
Harji XS Air Light Oil Burner 52
Suitable for Light Oil Only
Sealed in Burner
Suitable for high temperature and low temperature application i.e. Heat treatment, Tempering, Ceramic kiln, Forging, Annealing.
Very Easy to maintain
Self Proportioning Burner
Air and oil control valves are mechanically linked and operated through single lever. Once air oil ratio is initially set, it is automatically maintained constantly through out its entire 5:1 turn down range.
Quick removal of internal parts for cleaning
Easy to install and maintain
Suitable for both heavy oil and light oil
This burner can be used in widest industrial applications.
| Burner Size | Air Pressure at (28” ) WG |
| 52-2 | 6 LPH |
| 42-3 | 7.5 kg/hr |
| 52-3 | 9 LPH |
| 52-4 | 15 LPH |
| 52-5 | 25 LPH |
| 52-6 | 40 LPH |
| 52-7 | 70 LPH |
| 52-7a | 85 LPH |
| Burner Size | Air Pressure 703 MM (28" ) WG |
| 1 | 6.25 LPH |
| 2 | 9.0 LPH |
| 3 | 15.8 LPH |
| 3A | 25.02 LPH |
| 4 | 34.0 LPH |
| 4A | 54.7 LPH |
| 5 | 68.0 LPH |
| 5A | 102.2 LPH |
